Manual.ly Logo

Worx Sonicrafter WX693.9 Manual

0,0 · 0 Valoraciones

Manual en PDF · 140 Páginas

Español

M: QW-35-FL
página

/ 140

Loading...
b973a98d458b2fa23e6e31751e699c9905bd page 7
7
20V Cordless Oscillating Tool EN
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
c) Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected
situations.
5) Battery tool use and care
a) Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from
one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may
cause irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion.
g) Follow all charging instructions and
do not charge the battery pack or tool
outside the temperature range specified
in the instructions. Charging improperly or at
temperatures outside the specified range may
damage the battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
b) Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SAFETY INSTRUCTION FOR
CUTTING
Hold the power tool by insulated gripping
surfaces, when performing an operation where
the cutting accessory may contact hidden wiring.
Cutting accessory contacting a “live” wire may make
exposed metal parts of the power tool “live” and could
give the operator an electric shock.
SAFETY WARNINGS FOR
BATTERY PACK
a) Do not dismantle, open or shred cells or
battery pack.
b) Do not short-circuit a battery pack. Do not
store battery packs haphazardly in a box or
drawer where they may short-circuit each
other or be short-circuited by conductive
materials. When battery pack is not in use, keep
it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery terminals
together may cause burns or a fire.
c) Do not expose battery pack to heat or fire.
Avoid storage in direct sunlight.
d) Do not subject battery pack to mechanical
shock.
e) In the event of battery leaking, do not allow
the liquid to come into contact with the skin
or eyes. If contact has been made, wash the
affected area with copious amounts of water
and seek medical advice.
f) Keep battery pack clean and dry.

Chatee con su manual de Worx Sonicrafter WX693.9 usando IA

Obtenga respuestas instantáneas de IA de su manual de Worx Sonicrafter WX693.9

Pregunte lo que quiera sobre Worx Sonicrafter WX693.9. Las respuestas provienen de este manual, con las páginas en las que se basan.

Sonicrafter WX693.9 Programa de mantenimiento

Después del uso / Cuando esté sucia
Limpie la herramienta con un paño seco

Nunca use agua ni limpiadores químicos. Limpie con un paño seco y guárdela en un lugar seco.

Mostrar en el manual (página 12)
Según sea necesario
Mantenga limpias las ranuras de ventilación del motor

Asegúrese de que las ranuras de ventilación estén libres de polvo para evitar el sobrecalentamiento. Es normal ver chispas a través de las ranuras.

Mostrar en el manual (página 12)
Regularmente
Reemplace los accesorios

Reemplace el accesorio regularmente para mantener una eficiencia de trabajo óptima.

Mostrar en el manual (página 12)
Antes/Durante el uso
Compruebe el filo de la cuchilla

Mantenga siempre las herramientas de corte y las cuchillas afiladas y limpias para una operación segura y un mejor control.

Mostrar en el manual (página 7)
M: qwen/qwen3.8-flash

Haz una Pregunta

0/1000

¿Recomiendas Sonicrafter WX693.9?

Sí No

Preguntas frecuentes

A

Debe usar solo grupos de baterías designadas específicamente diseñadas para este equipo. Usar baterías incompatibles puede crear un riesgo de lesión o fuego. Consulte el manual para modelos aprobados como la serie WA3550 o WA3551.

¿Esta respuesta fue útil?

A

Limpie la herramienta con un paño seco. Nunca use agua o limpiadores químicos. Mantenga los mangos y superficies de agarre libres de aceite y grasa para asegurar un control seguro.

¿Esta respuesta fue útil?

A

Sí, está destinado para metales no ferrosos y láminas de metal finas. Use hojas de sierra adecuadas y mantenga alta frecuencia de oscilación para un rendimiento eficiente en estos materiales.

¿Esta respuesta fue útil?

A

Si la herramienta se vuelve demasiado caliente especialmente a baja velocidad, establezca la velocidad al máximo y hágala funcionar sin carga durante dos a tres minutos para enfriar el motor.

¿Esta respuesta fue útil?

A

No, la herramienta eléctrica no requiere lubricación adicional ni mantenimiento. No contiene piezas reparables por el usuario que necesiten lubricación.

¿Esta respuesta fue útil?

A

Mantenga el grupo de baterías fuera del alcance de los niños y lejos de objetos metálicos como llaves o monedas. No lo almacene en la luz directa del sol o lugares húmedos.

¿Esta respuesta fue útil?

M: QW-35-FL

Ventajas y Desventajas

Ventajas

  • El dial de velocidad variable permite la optimización para diferentes materiales y accesorios.
  • El peso compacto de 0.9 kg reduce la fatiga del usuario durante proyectos prolongados.
  • La luz LED actúa como indicador de capacidad de batería para una mejor gestión del flujo de trabajo.
  • La interfaz de accesorio universal admite herramientas de otras marcas principales.
  • Compatible con múltiples grupos de baterías de 20V del sistema PowerShare.
VS

Desventajas

  • No se incluye cargador ni grupo de baterías en la configuración del paquete solo.
  • Operación ruidosa requiere protección auditiva debido a nivel de presión sonora de 73dB.
  • Requiere bordes de corte afilados para evitar el bloqueo y sobrecarga del motor.
  • No es adecuado para sumersión en agua o ambientes húmedos sin precauciones.
  • El motor puede sobrecalentarse si se usa continuamente a velocidades muy bajas.
M: QW-35-FL

Producto Especificación

Batería

20V, Ion-Litio

Velocidad sin carga

5.000-18.000 rpm

Ángulo de oscilación

3,6 grados

Montaje de herramienta

Sistema de cambio rápido

Características

Regulación de velocidad, luz de trabajo LED

Peso

0,90 kg

Contenido del paquete

Sin cargador ni batería, kit de accesorios

M: QW-35-FL

Producto Descripción

Visión General de la Herramienta Multiuso Inalámbrica Worx Sonicrafter 20V

El manual del modelo Worx WX693.9 Sonicrafter 20V PowerShare Herramienta Multiuso Inalámbrica Solo + Accesorios proporciona orientación esencial para los usuarios de este dispositivo de alto rendimiento. Aunque la documentación técnica hace referencia al modelo WX696, las especificaciones funcionales se aplican ampliamente a esta serie de potencia. Esta herramienta está diseñada para diversas aplicaciones incluyendo sierra, remodelación y retiro de sujetadores. Opera con un dial de velocidad variable que permite a los usuarios ajustar las frecuencias de oscilación de 5000 a 18000 por minuto. El voltaje máximo alcanza 20 voltios, proporcionando suficiente potencia para cortar a través de madera, plástico, fibra de vidrio y metales no ferrosos. La herramienta desnuda pesa 0.9 kilogramos, asegurando reducción de fatiga durante tareas extendidas.

Guías de Seguridad y Operativas

La seguridad es crítica al operar esta herramienta eléctrica. Los usuarios deben mantener un área de trabajo limpia y bien iluminada para prevenir accidentes. Evite operar en atmósferas explosivas donde haya líquidos o polvo inflamables presentes. Mantenga a los niños y espectadores alejados para evitar distracciones. La seguridad eléctrica requiere usar enchufes sin modificar y tomas coincidentes. Nunca exponga la herramienta a lluvia o condiciones húmedas. El equipo de protección personal como protección ocular y máscaras contra el polvo es obligatorio. Previenda el arranque accidental asegurándose de que el interruptor esté apagado antes de conectar a la batería. Quite las llaves de ajuste antes de encender la herramienta para evitar lesiones personales.

Mantenimiento y Cuidado

El mantenimiento adecuado extiende la vida útil de la herramienta. No hay piezas reparables por el usuario dentro de la herramienta eléctrica. No use agua o limpiadores químicos para la limpieza. Limpie la carcasa con un paño seco. Mantenga limpios los conductos de ventilación del motor para prevenir sobrecalentamiento. Ocasionalmente chispas visibles a través de los conductos de ventilación son normales. Almacene las herramientas inactivas fuera del alcance de los niños. Mantenga la batería separadamente cargándola solo con el cargador especificado. Evite exponer la batería a temperaturas superiores a 130 grados Celsius o fuego. Deseche los productos eléctricos desechados correctamente de acuerdo con las pautas locales de reciclaje.

Accesorios y Aplicaciones

La interfaz de accesorio de ajuste universal acepta accesorios de varias marcas incluyendo Bosch y Makita. La alta frecuencia de oscilación es adecuada para lijar, cortar sierra y pulir piedra o metal. La baja frecuencia de oscilación funciona mejor para raspar barnices y pintura vieja. Siempre sujete la pieza de trabajo firmemente antes de cortar para asegurar precisión. La presión fuerte no aumenta las tasas de corte pero acelera el desgaste del accesorio. Reemplace los accesorios regularmente para mantener una eficiencia de funcionamiento óptima. Invierta en accesorios antivibración si la herramienta se usa regularmente para minimizar riesgos de síndrome de vibración mano-brazo.

M: QW-35-FL

© Copyright 2026 Manual.ly