Manual.ly Logo

Tunturi Centuri T100 Manual

0,0 · 0 Valoraciones

Manual en PDF · 106 Páginas

Español

M: QW-35-FL
página

/ 106

Loading...
5043c9df716d6a256c9459773355b89e8bb7 page 18
• Prevent that the solution comes between running deck and
running belt at all times.
This should be done on a regular basis to extend belt and running
deck life.
Lubrication (fig. F-6)
‼ NOTE
• The Treadmill running belt is pre lubricated before fitting on your
treadmill during the production of the unit. Therefore it is not
needed to lubricate the running belt when taken into use for the
first time.
The running belt must be checked for lubrication condition regularly.
Therefore the treadmill comes with a 300 hours reminder function.
The “TIME WINDOW” will display “OIL” and will make an acoustic
beeping sound every 10 seconds to remind you. Follow the below
checking procedure and eliminate the “OIL” message and acoustic
warning signal by pressing and hold the “STOP” button for at least 3
seconds during this warning signal.
⚠ WARNING
• Before lubrication, remove the mains plug from the wall socket.
⚠ CAUTION
• We recommend to check the running belt lubrication at least
once every month, as more factors than time can be effective to
the lubricant conditions.
• Only lubricate the running belt if necessary. If you apply too
much lubricant, the running belt will slip easily due to lack of
friction.
- Stand steadily on the running belt.
- Take hold of the front handlebar and push the running belt with
your feet so that it slides back and forth. The running belt must
move smoothly and evenly without making sound.
- If the running belt does not move smoothly and evenly or if the
running belt does not move at all, touch the underside of the
running belt with your fingertips to check the lubrication:
• If you feel lubrication or your fingertips are shiny, there is
sufficient lubrication on the running belt.
• If you do not feel lubrication or your fingertips are dusty or
rough, apply lubricant (±10 ml.) in the middle of the running
deck under the running belt and let the equipment operate at
5km/h for at least 5 minutes.
• After lubrication, do not fold the equipment before having done
a workout for 2 minutes with a speed of at least 5 km/h.
This will cause the lubricant being fully absorbed by the running
belt and being spread evenly.
‼ NOTE
• When 5 km/h is too fast for you, do walk at your desired speed,
but extend the duration to at least 5 minutes.
Click to see our supportive YouTube video
https://youtu.be/ceaOYnofY5k
Belt adjustments
The performance of your treadmill is dependent on the frame running
on a reasonably level surface. If the frame is not level, the front and
back roller cannot run parallel, and constant belt adjustment may be
necessary.
The treadmill is designed to keep the running belt reasonably centred
while in use. It is normal for some belts to drift near one side while
the belt is running with no one on it. After a few minutes of use,
the running belt should have a tendency to centre itself. If, during
use, the belt continues to move toward one side, adjustments are
necessary.
EXCEPTION
During rehabilitation where the user is using one leg much stronger
than the other, it might happen that the running belt drifts to one
side. In these cases you should not adjust unless the running belt
does not centre itself during normal condition usage.
Belt tension adjustment
Adjustment must be made from the rear roller. The adjustment bolts
are located at the end of the step rails in the end caps.
- Tighten the rear roller bolts (clockwise) only enough to prevent
slippage at the front roller. Turn both running belt tension
adjustment bolts in increments of 1/4 turn each and inspect for
proper tension by walking on the belt at a low speed, making sure
the belt does not slip. Keep tensioning the bolts until the belt
stops slipping.
- If you feel the belt is tight enough, but it still slips, the problem
may be a loose Motor drive belt under the front cover.
- Do Not Over-tighten
Over tightening will cause belt damage and premature bearing
failure.
Click to see our supportive YouTube video
https://youtu.be/pp4_4bL1MXo
Centre the running belt (fig. F-5)
Centre the running belt is needed when your running belt is not
tracking in the centre of your running surface. This is noticed easily
when the gap between side landing and running belt is significantly
bigger on one side compared to the other side.
This can be caused by a few reasons, such as:
REASON 1
You do a workout using one leg more powerful in push off during
your workout. This causes the belt being pushed aside, but will
correct automatically when let the running belt run unloaded for a few
minutes.
REASON 2
Your treadmill is not levelled horizontally, where gravity pulls the
running belt slowly to the lowest end of the treadmill. This must be
corrected by levelling the treadmill correctly. as this cannot be solved
by any other adjustment.
REASON 3
The running belt is not centred correctly between the front and rear
roller drum. This needs be corrected by adjusting the running belt
tracking as described below.
To adjust the running belt’s tracking use the Allen key being provided
with your treadmill.
- Set your treadmill at a speed of ± 5 km/h, not running on it.
- When the running belt is tracking to the right side.
Turn the left-hand rear roller adjustment bold, located on the rear
end in a socket in the rear roller cover, counter clockwise for 1/4
turn.
- When the running belt is tracking to the left side.
Turn the right-hand rear roller adjustment bold, located on the rear
end in a socket in the rear roller cover, counter clockwise for 1/4
turn.
- Await ±2 minutes to give the running belt the time to respond to
the adjustment before repeating the adjustment steps if needed to
get to the desired result.
24
English

Chatee con su manual de Tunturi Centuri T100 usando IA

Obtenga respuestas instantáneas de IA de su manual de Tunturi Centuri T100

Pregunte lo que quiera sobre Tunturi Centuri T100. Las respuestas provienen de este manual, con las páginas en las que se basan.

Centuri T100 Programa de mantenimiento

Recuérdame cuándo corresponde realizar el mantenimiento
Mensual
Realizar una revisión general de mantenimiento

El manual indica que la cinta requiere mantenimiento mensual incluso cuando no está en uso. Desconecte la alimentación antes de comenzar.

Mostrar en el manual (página 23)
Mensual
Aspirar debajo de la cinta

Desconecte el cable de alimentación y aspire debajo de la cinta para evitar que el polvo y el pelo de las mascotas bloqueen las entradas de aire.

Mostrar en el manual (página 23)
Mensual
Limpiar la plataforma de carrera y la correa

Limpie el borde de la correa y el área entre la correa y el marco con un paño seco. Use un cepillo de nylon sobre la superficie de la correa.

Mostrar en el manual (página 23)
Mensual
Verificar la lubricación de la correa de carrera

Compruebe si la correa se mueve suavemente. Si está polvorienta o áspera, aplique aproximadamente 10 ml de lubricante bajo el centro de la correa.

Mostrar en el manual (página 24)
Después de cada uso
Limpiar el equipo con un paño suave

Limpie el equipo con un paño suave y absorbente después de cada uso para eliminar el sudor y la suciedad.

Mostrar en el manual (página 23)
Regularmente
Aspirar las partes visibles

Use una aspiradora con una boquilla de succión pequeña para limpiar regularmente las partes visibles del equipo.

Mostrar en el manual (página 23)
Regularmente
Comprobar la tensión de los tornillos y tuercas

Inspeccione todos los tornillos y tuercas periódicamente para asegurarse de que permanezcan apretados y seguros.

Mostrar en el manual (página 23)
Cada 300 horas
Comprobar el estado de la lubricación

La consola muestra 'OIL' y emite un pitido cada 10 segundos después de 300 horas de funcionamiento para recordarle que debe comprobar la lubricación.

Mostrar en el manual (página 24)
Según sea necesario
Ajustar la alineación de la correa

Centre la correa de carrera utilizando la llave Allen si se desliza hacia un lado durante el uso. Ajuste los pernos del rodillo trasero en cuartos de vuelta.

Mostrar en el manual (página 24)

Recordatorios de mantenimiento gratuitos

Según la fecha de compra. Siempre gratis, cancela la suscripción cuando quieras.

Al enviar, aceptas la política de privacidad. Cancela la suscripción con un clic en cualquier correo electrónico.
M: qwen/qwen3.8-flash

Haz una Pregunta

0/1000

¿Recomiendas Centuri T100?

Sí No

Preguntas frecuentes

A

La cinta transportadora está diseñada para soportar un peso máximo de usuario de 135 kg o 300 lbs. Exceder este límite puede dañar el equipo y anular la garantía.

¿Esta respuesta fue útil?

A

No, la correa pectoral no está incluida en el paquete estándar. Debe comprarse por separado como accesorio si prefieres el monitoreo inalámbrico de la frecuencia cardíaca sobre los sensores manuales.

¿Esta respuesta fue útil?

A

Cuando aparezca el mensaje OIL, mantén presionado el botón STOP durante al menos tres segundos durante la señal de advertencia acústica para borrar el mensaje y restablecer el temporizador.

¿Esta respuesta fue útil?

A

Sí, el panel admite conectividad Bluetooth tanto para dispositivos iOS como Android, permitiéndote sincronizar tus datos de entrenamiento con aplicaciones de fitness compatibles.

¿Esta respuesta fue útil?

A

El montaje requiere al menos dos personas debido al peso del marco. Seguir los pasos ilustrados en el manual cuidadosamente garantizará una configuración y seguridad adecuadas.

¿Esta respuesta fue útil?

A

Si la llave de seguridad se extrae de la ranura del panel, la cinta transportadora se detendrá inmediatamente para prevenir lesiones. El panel también mostrará un código de error E7 hasta que se vuelva a insertar la llave.

¿Esta respuesta fue útil?

M: QW-35-FL

Ventajas y Desventajas

Ventajas

  • Capacidad máxima de peso de usuario de 135 kg garantiza estabilidad para usuarios más pesados
  • 36 programas preestablecidos más 3 opciones definidas por el usuario ofrecen diversa variedad de ejercicios
  • La conectividad Bluetooth permite una integración perfecta con aplicaciones y dispositivos de fitness
  • Diseño plegable con ruedas de transporte simplifica el almacenamiento y la reubicación
  • Rango de inclinación de 0 a 15 niveles añade intensidad y simula terreno exterior
VS

Desventajas

  • Los sensores de pulso manual pueden perder precisión si la piel está demasiado seca o sudorosa
  • La correa pectoral de frecuencia cardíaca se vende por separado como accesorio
  • El recordatorio de lubricación requiere reinicio manual después de la aplicación
  • El montaje requiere al menos dos personas debido a componentes pesados
  • La pantalla del panel puede congelarse si se expone a la luz solar directa o sudor
M: QW-35-FL

Producto Especificación

Colores

negro, dorado

Potencia de salida

3.73 kW continuo

Velocidad

0.8-20 km/h

Inclinación

0-15% ajustable electrónicamente

Superficie de carrera

140x51 cm

Peso máximo del usuario

99.8 kg

Dimensiones

178x84x142 cm

Tamaño plegado

102x84x155 cm

Peso

82.5 kg

Características

ruedas de transporte, sensores de pulso en los agarres, compatible con correa torácica, soporte para botella, compatibilidad con aplicaciones (iOS, Android), Bluetooth, plegable

M: QW-35-FL

Producto Descripción

Descubre la Cinta Transportadora Tunturi Centuri Performance T100

La Cinta Transportadora Tunturi Centuri Performance T100 representa un paso significativo hacia adelante en la tecnología de acondicionamiento físico en el hogar, diseñada para acomodar a usuarios de todos los niveles. Ya sea que seas un principiante buscando comenzar tu viaje o un atleta avanzado que busca entrenamientos desafiantes, esta cinta ofrece la versatilidad necesaria para un entrenamiento efectivo. El manual destaca su construcción robusta e interfaz fácil de usar, lo que la convierte en una elección ideal para aquellos que valoran la calidad y el rendimiento.

Esta cinta cuenta con un motor potente capaz de velocidades que van desde 0.8 hasta 20.0 km/h, asegurando que cada entrenamiento pueda adaptarse a objetivos específicos. Con 36 programas preestablecidos y tres perfiles de usuario personalizables, puedes variar fácilmente tu rutina para evitar el aburrimiento y maximizar los resultados. La función de inclinación permite hasta 15 niveles de ajuste, simulando subidas de colinas y aumentando la intensidad de tus sesiones cardiovasculares sin necesidad de aumentar excesivamente la velocidad.

La seguridad es primordial con las guías del manual de la Cinta Transportadora Tunturi Centuri Performance T100. El panel incluye características de seguridad esenciales como una llave de seguridad magnética que detiene instantáneamente la máquina si se desaloja. Además, los sensores de pulso manual proporcionan monitoreo de frecuencia cardíaca en tiempo real, ayudándote a mantenerte dentro de tu zona objetivo. Para datos más precisos, la unidad admite conectividad Bluetooth con correas pectorales externas y aplicaciones móviles, permitiéndote rastrear tu progreso sin problemas en dispositivos iOS y Android.

El mantenimiento es sencillo gracias a los recordatorios integrados para lubricación de la banda e instrucciones de limpieza encontradas en la documentación. El diseño plegable ahorra valioso espacio cuando no está en uso, mientras que las ruedas de transporte facilitan el movimiento fácil por tu hogar. Con una capacidad máxima de peso de usuario de 135 kg, esta cinta asegura durabilidad y estabilidad durante años de servicio confiable.

M: QW-35-FL

© Copyright 2026 Manual.ly