Manual.ly Logo

Monacor MBM-1002 Manual

0,0 · 0 Valoraciones

Manual en PDF · 3 Páginas

Español

M: OA-GPT-54-NAN
página

/ 3

Loading...
0b37321b30fa80d758e6a877be55aa6df2ae page 1
ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS
MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany
Copyright
©
by MONACOR INTERNATIONAL. All rights reserved.
A-0495.98.04.04.2016
1
2
3
4
5
MB-5002 Bestell-Nr. • Order No. 38.2720
MBM-1002 Bestell-Nr. • Order No. 38.2350
Mirror Ball and Motor
Please read these operating instructions carefully
prior to operating the unit and keep them for
later use.
1 Applications
In connection with a spotlight (e. g. PAR-36 /…), the mir-
ror ball MB-5002 serves for creating light effects and is
ideally suited for use in public areas (discothèque, thea-
tre, etc.). The mirror ball is specially designed for ceiling
suspension and is driven by the motor MBM-1002.
2 Safety Notes
The motor corresponds to all relevant directives of the
EU and is therefore marked with .
WARNING The motor is supplied with hazardous
mains voltage. Leave servicing to skilled
personnel only. Inexpert handling may
cause an electric shock hazard.
•
The motor is suitable for indoor use only. Protect it
against dripping water and splash water, high air
humid ity, and heat (admissible ambient temperature
range 0 – 40 °C).
•
Always wear gloves when handling mirror balls; glass
splinters may cause injuries!
•
Do not operate the motor and immediately discon-
nect it from the mains voltage:
1. in case of visible damage to the motor or to the
mains cable,
2. if a defect might have occurred after the unit was
dropped or suffered a similar accident,
3. if malfunctions occur.
In any case the motor must be repaired by skilled
personnel.
•
A damaged mains cable must be replaced by skilled
personnel only.
•
For cleaning the motor only use a dry, soft cloth;
never use water or chemicals. For the mirror ball, a
commercial glass cleaner may be used.
•
No guarantee claims for the motor or the mirror ball
and no liability for any resulting personal damage
or material damage will be accepted if the items are
used for other purposes than originally intended, if
they are not correctly mounted or connected, or not
repaired in an expert way.
•
Important for U. K. Customers!
The wires in this mains lead are coloured in accord-
ance with the following code:
green / yellow = earth, blue = neutral, brown = live
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug, pro-
ceed as follows:
1. The wire which is coloured green and yellow must
be connected to the terminal in the plug which is
marked with the letter E or by the earth symbol ,
or coloured green or green and yellow.
2. The wire which is coloured blue must be con-
nected to the terminal which is marked with the
letter N or coloured black.
3. The wire which is coloured brown must be con-
nected to the terminal which is marked with the
letter L or coloured red.
Warning – This appliance must be earthed.
If the motor and the mirror ball are to be put
out of operation definitively, take them to a
local recycling plant for a disposal which is not
harmful to the environment.
3 Mounting
WARNING The motor MBM-1002 and the mirror ball
MB-5002 are perfectly matched; only use
them together. Mount the ball safely and
expertly to the motor as described below.
Make sure that it will not work loose and
drop on the audience.
1) Fasten the motor to a suitable spot on the ceiling by
means of four screws. Suspend the ball in such a way
that it will be out of reach of the audience.
2) Use the large eyebolt (4) to hook the ball into the
chain fastener (3). If you wish to reduce the suspen-
sion height of the ball, insert a chain of sufficient
stability. Tighten the fastener (3) to secure the ball.
3) Hook the safety rope (2) into the eyebolt (1) of the
motor and into the small eyebolt (5) of the ball.
Tighten the fasteners to secure the rope.
4) The connection of the motor to the mains (230 V/
50 Hz) must always be made by skilled personnel.
5) Check the ball at regular intervals to make sure that
it is still safely suspended.
4 Specifications
Motor MBM-1005
Power supply: . . . . . . . . . . 230 V/ 50 Hz / 5 VA
Carrying capacity: . . . . . . . 10 kg
Rotating speed: . . . . . . . . 1.5 rpm
Dimensions, weight: . . . . . ⌀ 195 mm × 127 mm, 1 kg
Mirror ball MB-5002
Dimensions: . . . . . . . . . . . ⌀ 50 cm
Weight: . . . . . . . . . . . . . . . 6.2 kg
Subject to technical modification.
Spiegelkugel und Motor
Bitte lesen Sie diese Anleitung vor der Inbetrieb-
nahme gründlich durch und heben Sie sie für ein
späteres Nachlesen auf.
1 Einsatzmöglichkeiten
Die Spiegelkugel MB-5002 dient in Verbindung mit
einem Punktstrahler (z. B. PAR-36 /…) zur Erzeugung
von Lichteffekten und ist für den Einsatz in öffent-
lichen Bereichen (Diskothek, Theater etc.) geeignet. Sie
ist speziell für die Deckenmontage konzipiert und wird
durch den Motor MBM-1002 angetrieben.
2 Hinweise für den sicheren Gebrauch
Der Motor entspricht allen relevanten Richtlinien der
EU und ist deshalb mit gekennzeichnet.
WARNUNG Der Motor wird mit lebensgefährlicher
Netzspannung versorgt. Nehmen Sie des-
halb niemals selbst Eingriffe an ihm vor.
Es besteht die Gefahr eines elektrischen
Schlages.
•
Der Motor ist nur zur Verwendung im Innenbereich
geeignet. Schützen Sie ihn vor Tropf- und Spritz-
wasser, hoher Luftfeuchtigkeit und Hitze (zulässiger
Einsatztemperaturbereich 0 – 40 °C).
•
Tragen Sie beim Umgang mit Spiegelkugeln grund-
sätzlich Handschuhe. Beachten Sie die Schnitt- und
Splittergefahr durch Glas!
•
Nehmen Sie den Motor nicht in Betrieb und trennen
Sie ihn sofort von der Netzspannung:
1. wenn sichtbare Schäden am Motor oder am Netz-
kabel vorhanden sind,
2. wenn nach einem Sturz oder Ähnlichem der Ver-
dacht auf einen Defekt besteht,
3. wenn Funktionsstörungen auftreten.
Geben Sie den Motor in jedem Fall zur Reparatur in
eine Fachwerkstatt.
•
Ein beschädigtes Netzkabel darf nur durch eine Fach-
werkstatt ersetzt werden.
•
Verwenden Sie für die Reinigung des Motors nur ein
trockenes, weiches Tuch, auf keinen Fall Chemikalien
oder Wasser. Für die Spiegelkugel können handels-
übliche Glasreiniger verwendet werden.
•
Wird der Motor oder die Spiegelkugel zweckent-
fremdet, nicht fachgerecht montiert, falsch ange-
schlossen oder nicht fachgerecht repariert, kann
keine Garantie für diese Teile und keine Haftung für
daraus resultierende Sach- oder Personenschäden
übernommen werden.
Sollen der Motor und die Spiegelkugel end-
gültig aus dem Betrieb genommen werden,
übergeben Sie sie zur umweltgerechten Ent-
sorgung einem örtlichen Recyclingbetrieb.
3 Montage
WARNUNG Der Motor MBM-1002 und die Spiegel-
kugel MB-5002 sind genau aufeinander
abgestimmt und dürfen nur zusammen
verwendet werden. Die Kugel muss, wie
folgt beschrieben, sicher und fachgerecht
am Motor montiert werden, damit sie sich
nicht lösen und auf Personen fallen kann.
1) Den Motor mit 4 Schrauben an geeigneter Stelle der
Decke festschrauben. Die Kugel muss außerhalb der
Reichweite des Publikums aufgehängt werden.
2) Die Kugel mit der großen Öse (4) in den Kettenver-
schluss (3) einhängen. Soll die Kugel tiefer gehängt
werden, kann auch eine ausreichend stabile Kette
dazwischen montiert werden. Den Kettenverschluss
(3) fest zuschrauben.
3) Das Sicherungsseil (2) in die Öse (1) des Motors und
in die kleine Öse (5) der Kugel einhängen. Die Ver-
schlüsse fest zuschrauben.
DeutschEnglish
4) Der Anschluss des Motors an das Stromnetz (230 V/
50 Hz) darf nur durch qualifiziertes Fachpersonal
erfolgen.
5) In regelmäßigen Abständen überprüfen, ob die
Kugel noch sicher hängt.
4 Technische Daten
Motor MBM-1005
Stromversorgung: . . . . . . . 230 V/ 50 Hz / 5 VA
Tragfähigkeit: . . . . . . . . . . 10 kg
Drehgeschwindigkeit: . . . 1,5 U / min
Abmessungen: . . . . . . . . . ⌀ 195 mm × 127 mm
Gewicht: . . . . . . . . . . . . . . 1 kg
Spiegelkugel MB-5002
Abmessungen: . . . . . . . . . ⌀ 50 cm
Gewicht: . . . . . . . . . . . . . . 6,2 kg
Änderungen vorbehalten.

Chatee con su manual de Monacor MBM-1002 usando IA

Obtenga respuestas instantáneas de IA de su manual de Monacor MBM-1002

Pregunte lo que quiera sobre Monacor MBM-1002. Las respuestas provienen de este manual, con las páginas en las que se basan.

MBM-1002 Programa de mantenimiento

Recuérdame cuándo corresponde realizar el mantenimiento
Anual
Verificar la seguridad de la suspensión de la bola

Verifique a intervalos regulares que la bola espejo permanezca suspendida y segura.

Mostrar en el manual (página 1)
Según sea necesario
Limpiar el exterior del motor

Use solo un paño suave y seco; nunca use agua o productos químicos en el motor.

Mostrar en el manual (página 1)
Según sea necesario
Limpiar la bola espejo

Se puede usar un limpiacristales comercial para la bola espejo.

Mostrar en el manual (página 1)

Recordatorios de mantenimiento gratuitos

Según la fecha de compra. Siempre gratis, cancela la suscripción cuando quieras.

Al enviar, aceptas la política de privacidad. Cancela la suscripción con un clic en cualquier correo electrónico.
M: QW-35-FL

Haz una Pregunta

0/1000

¿Recomiendas MBM-1002?

Sí No

Preguntas frecuentes

A

Es un motor diseñado para girar la bola de espejos MB-5002 y crear efectos de luz decorativos en recintos interiores como clubes, teatros y espacios para eventos.

¿Esta respuesta fue útil?

A

No. El motor está diseñado solo para uso en interiores. Debe protegerse del agua que gotea, las salpicaduras, la alta humedad y el calor excesivo.

¿Esta respuesta fue útil?

A

El motor funciona con 230 V / 50 Hz y tiene una potencia nominal de 5 VA. La conexión eléctrica debe realizarla personal cualificado.

¿Esta respuesta fue útil?

A

Está diseñado específicamente para la bola de espejos Monacor MB-5002. Ambos productos están pensados para usarse juntos de forma segura y correcta.

¿Esta respuesta fue útil?

A

La velocidad de rotación es de aproximadamente 1,5 rpm. Este movimiento lento crea un efecto de reflejo suave y atmosférico en lugar de un giro rápido.

¿Esta respuesta fue útil?

A

Usa un paño seco y suave para el motor y evita el agua o los productos químicos. La bola de espejos puede limpiarse con un limpiacristales estándar y la suspensión debe revisarse con regularidad.

¿Esta respuesta fue útil?

M: OA-GPT-54-NAN

Ventajas y Desventajas

Ventajas

  • El diseño compatible con la bola de espejos MB-5002 garantiza una combinación fiable.
  • La rotación lenta de 1,5 rpm crea efectos de iluminación suaves y clásicos.
  • La capacidad de carga de 10 kg se adapta a instalaciones de bola de espejos de tamaño medio.
  • La cuerda de seguridad y el cierre de cadena ayudan a una fijación segura en el techo.
VS

Desventajas

  • Solo para uso en interiores, por lo que no es adecuado para eventos al aire libre.
  • La conexión eléctrica debe realizarla personal cualificado.
  • Funciona mejor solo con la bola de espejos MB-5002 correspondiente.
  • Requiere inspección regular para mantener la instalación segura.
M: OA-GPT-54-NAN

Producto Especificación

Tipo

Motor

Velocidad de Rotacion

2/min

Color

negro

Peso

950 g

M: GO-GEM-FL-25

Producto Descripción

Monacor MBM-1002: Movimiento fiable para efectos de bola de espejos

El Monacor MBM-1002 está diseñado para un solo propósito: dar vida a una bola de espejos con una rotación suave y constante. En combinación con la bola de espejos MB-5002, convierte una instalación de techo ordinaria en una pieza central clásica de espectáculo de luz. En clubes, teatros, espacios para eventos y otros recintos interiores, este motor compacto ayuda a crear los reflejos brillantes que definen un ambiente memorable.

Si buscas el manual del Monacor MBM-1002, el mensaje esencial es simple: esta unidad está diseñada para un uso seguro y combinado con la MB-5002. Esa compatibilidad es importante porque el motor, el hardware de suspensión y la capacidad de carga están pensados para funcionar juntos. Con una capacidad de carga de 10 kg y una velocidad de rotación de 1,5 rpm, produce un movimiento tranquilo y elegante en lugar de un giro distraído. Esto lo hace especialmente adecuado para efectos ambientales donde la constancia es más importante que la velocidad.

La instalación es sencilla para profesionales, pero debe realizarse con cuidado. El motor se monta al techo con cuatro tornillos, mientras que la bola se asegura con el cierre de cadena y una cuerda de seguridad adicional. Este enfoque de doble seguridad es un detalle importante, porque la bola de espejos debe permanecer firmemente en su lugar sobre el público. La unidad funciona con 230 V / 50 Hz, por lo que la conexión eléctrica debe dejarse siempre en manos de personal cualificado.

El MBM-1002 está diseñado solo para uso en interiores, y el entorno de funcionamiento debe mantenerse seco y moderado. Se recomiendan inspecciones regulares para confirmar que la bola permanece suspendida de forma segura. Para el mantenimiento, basta con un paño suave y seco para el motor, mientras que la bola de espejos puede limpiarse con un limpiacristales estándar. Los guantes también son una buena opción al manipular la bola, ya que los bordes de vidrio pueden ser afilados.

Para locales que buscan un brillo fiable y clásico, el Monacor MBM-1002 ofrece una solución práctica y enfocada. No intenta hacerlo todo; hace bien una sola tarea, por eso sigue siendo una opción útil para instalaciones de iluminación decorativa.

Notas

  • Utilízalo solo con la bola de espejos MB-5002 correspondiente.
  • Mantén la instalación en interiores y alejada de la humedad.
  • Comprueba la suspensión con regularidad por seguridad.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly