Manual.ly Logo

Cameo TS 60 RGBW Manual

0,0 · 0 Valoraciones

Manual en PDF · 92 Páginas

Español

M: QW-35-FL
página

/ 92

Loading...
05cfd9f34f24d9155c2a75f001f5323d1247 page 3
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCH
ENGLISH
3
DMX
ENGLISH
YOU‘VE MADE THE RIGHT CHOICE!
We have designed this product to operate reliably over many years. Please read this User‘s Manual carefully, so that you can begin making
optimum use of your Cameo Light product quickly. Learn more about Cameo Light on our website WWW.CAMEOLIGHT.COM.
PREVENTIVE MEASURES
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain that wall mounts are properly installed and
secured. Make certain that the equipment is installed securely and cannot fall down.
7. During installation, observ e the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is
always installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. This appliance is designed exclusively for indoor use, do not use this equipment in the immediate vicinity of water (does not apply
to special outdoor equipment - in this case, observe the special instructions noted below). Do not expose this equipment to flammable
materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with liquids, such as vases or
drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufacturer.
15. Do not open or modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.
17. During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if it has been damaged in
anot her way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired
by authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.
FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:
22. CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet with a protective
ground. Never deactivate the protective ground of a power cord.
23. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do not switch it on immediately.
Moisture and condensation could damage the equipment. Do not switch on the equipment until it has reached room temperature.
24. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match the values specified on the
equipment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the
mains power values match. If the included power cord or power adapter does not fit in your wall outlet, contact your electrician.
25. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at the mains outlet and/or power
adapter and the equipment connector.
26. When connecting the equipment, make certain that the power cord or power adapter is always freely accessible. Always disconnect the
equipment from the power supply if the equipment is not in use or if you want to clean the equipment. Always unplug the power cord and
power adapter from the power outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter
with wet hands.
27. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this can shorten the useful life of
the equipment.
28. IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service centre.
29. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter from the power outlet.
30. If your device is equipped with a Volex power connector, the mating Volex equipment connector must be unlocked before it can be re-
moved. However, this also means that the equipment can slide and fall down if the power cable is pulled, which can lead to personal injuries
and/or other damage. For this reason, always be careful when laying cables.
31. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse.
32. The device must only be installed in a voltage-free condition (disconnect the mains plug from the mains).
33. Dust and other debris inside the unit may cause damage. The unit should be regularly serviced or cleaned (no guarantee) depending on
ambient conditions (dust etc., nicotine, fog) by qualified personnel to prevent overheating and malfunction.
34. Please keep a distance of at least 0.5 m to any combustible materials.
35. Power cables to power multiple devices must have a cross-section of at least 1.5 mm². Within the EU, the cables must correspond to
H05VV-F, or similar. Suitable cables are offered by Adam Hall. With these cables, you can connect multiple devices via the power OUT con-
nection to the power IN connection of an additional device. Make sure that the total current consumption of all connected devices does not
exceed the specified value on all connected devices (label on the device). Make sure to keep power cable connections as short as possible.

Chatee con su manual de Cameo TS 60 RGBW usando IA

Obtenga respuestas instantáneas de IA de su manual de Cameo TS 60 RGBW

Pregunte lo que quiera sobre Cameo TS 60 RGBW. Las respuestas provienen de este manual, con las páginas en las que se basan.

TS 60 RGBW Programa de mantenimiento

Regularmente (según las condiciones ambientales)
Realice mantenimiento o limpie la unidad para eliminar el polvo y los residuos

El polvo y los residuos en el interior pueden causar daños. La unidad debe recibir mantenimiento regular o ser limpiada por personal cualificado según las condiciones ambientales (polvo, nicotina, niebla) para evitar el sobrecalentamiento.

Mostrar en el manual (página 3)
Antes de usar o después del transporte
Deje que el dispositivo alcance la temperatura ambiente antes de encenderlo

Si ha estado expuesto a fluctuaciones fuertes de temperatura, no lo encienda inmediatamente. La humedad y la condensación podrían dañar el equipo. Espere hasta que alcance la temperatura ambiente.

Mostrar en el manual (página 3)
M: qwen/qwen3.8-flash

Haz una Pregunta

0/1000

¿Recomiendas TS 60 RGBW?

Sí No

Preguntas frecuentes

A

No. El dispositivo está diseñado exclusivamente para uso en interiores. No lo expongas al clima o la humedad.

¿Esta respuesta fue útil?

A

Presiona Menú, selecciona DMX Addr, usa las teclas Arriba/Abajo, y confirma con Enter.

¿Esta respuesta fue útil?

A

La tasa de refresco es de 3,600 Hz, asegurando un funcionamiento suave para la grabación de cámara.

¿Esta respuesta fue útil?

A

No. Soporta modos autónomos Maestro/Eslavo, Automático, Sonido y Estático.

¿Esta respuesta fue útil?

A

La unidad consume 65 Vatios, voltaje operativo 100-240V CA.

¿Esta respuesta fue útil?

A

Sí, incluye un soporte de montaje, barndoor alado y marco de filtro.

¿Esta respuesta fue útil?

M: QW-35-FL

Ventajas y Desventajas

Ventajas

  • Alto poder LED COB 60W RGBW proporciona excelente brillo.
  • RDM habilitado para gestión remota de dispositivos y consultas de estado.
  • Múltiples modos autónomos ofrecen flexibilidad sin controladores.
  • Zoom manual permite control preciso del ángulo del haz de 10 a 41 grados.
  • Alta tasa de refresco previene parpadeo en grabaciones de video.
VS

Desventajas

  • Instalación suspendida requiere personal capacitado para la seguridad.
  • Cable de alimentación fijo no puede ser reemplazado fácilmente si está dañado.
  • Dispositivo está diseñado solo para uso en interiores, no es a prueba de clima.
  • Requiere terminador específico de 120 ohmios para el último dispositivo en la cadena DMX.
  • El ruido del ventilador podría notarse en ambientes silenciosos.
M: QW-35-FL

Producto Especificación

Base

LED (1x RGBW)

Consumo máximo de potencia

65 W

Control DMX

sí (5 canales)

Color de la carcasa

negro

Características

Salida DMX

Dimensiones

14,50x20,50x24,00 cm (AnxAlxPr)

Peso

3,60 kg

M: QW-35-FL

Producto Descripción

Eleva tu configuración de escenario hoy

Descubre el potencial de Cameo TS 60W RGBW Negro

Al buscar soluciones de iluminación versátiles para eventos, el Cameo TS 60W RGBW Negro se destaca como una elección poderosa para técnicos. Esta unidad combina capacidades de alto rendimiento con controles fáciles de usar encontrados en la documentación del Manual de Cameo TS 60W RGBW Negro. Ya sea que seas un técnico profesional que busca confiabilidad o un aficionado que desea creatividad, comprender los modos operativos es clave para maximizar el rendimiento y la seguridad, encontrando la herramienta ideal para las necesidades de tu configuración.

Descripción General de Características

El foco utiliza un sistema de LED COB RGBW de 60 W de alto poder para entregar un brillo y saturación de color excepcionales. Esto permite capacidades extensas de mezcla de color sin requerir gales adicionales. El ángulo del rango de haz va de 10 a 41 grados, ofreciendo funcionalidad de zoom manual para lavados anchos y puntos ajustados. Cuenta con una tasa de refresco alta de 3,600 Hz, asegurando grabación de video suave sin problemas de parpadeo durante transmisiones en vivo. El dispositivo incluye una pantalla LC retroiluminada para monitoreo de estado fácil y ajustes de configuración.

Modos de Control Avanzados

La operación es flexible y se adapta a varios escenarios sin problemas para diferentes necesidades de evento. Puedes controlar el dispositivo vía protocolo DMX-512 con RDM habilitado para capacidades avanzadas de gestión remota. Las funciones autónomas incluyen modos Maestro/Eslavo, permitiendo que múltiples accesorios se sincronicen sin necesitar un controlador externo. También hay un Modo Control de Sonido que reacciona a pulsos de música, y un Modo Programa Automático para creación automática de escena. El Modo Estático permite ajuste directo desde la interfaz del dispositivo para configuraciones de escena individuales.

Seguridad y Configuración Operativa

La seguridad es primordial al instalar equipo de iluminación de alto poder. Las ranuras de ventilación deben permanecer limpias para evitar sobrecalentamiento durante uso prolongado. Siempre asegura las instalaciones suspendidas con cuerdas de seguridad para evitar caídas. No operes cerca de materiales inflamables ni almacenes líquidos cerca. El dispositivo está diseñado para uso en interiores exclusivamente. Espera diez minutos para enfriamiento después del uso antes de manipular para evitar quemaduras.

Especificaciones Técnicas y Soporte

Las opciones de conectividad soportan conectores XLR estándar para enlaces de transmisión de señal robustos. El sistema consume 65 Vatios de energía e incluye un soporte de montaje y barndoor alado. Soporta múltiples modos DMX que van de 3 canales hasta 13 canales dependiendo de la función seleccionada. Los usuarios pueden ajustar curvas de degradado para coincidir con la percepción humana o estilos de lámpara específicos. Varios macros de color están pre-programados para selección rápida durante espectáculos en vivo y práctica. La unidad opera confiablemente a través de un amplio rango de voltaje y ajustes de frecuencia para uso global.

Conclusión

Esta lámpara proporciona confiabilidad y creatividad para aplicaciones de tecnología de teatro y eventos en todo el mundo. Dominar el Manual de Cameo TS 60W RGBW Negro asegura el rendimiento y longevidad óptimos. Disfruta de resultados consistentes con esta herramienta profesional diseñada para longevidad y satisfacción completa del usuario.

M: QW-35-FL

© Copyright 2026 Manual.ly