Manual.ly Logo

Cameo Steam Wizard 2000 Manual

0,0 · 0 Valoraciones

Manual en PDF · 56 Páginas

Español

M: OA-GPT-54-NAN
página

/ 56

Loading...
714b138416a539446ba5f32c7c4e7f8d27d5 page 3
ITALIANOPOLSKIESPAÑOL
FRANCAISDEUTSCHENGLISH
3
DMX
ENGLISH
YOU‘VE MADE THE RIGHT CHOICE!
We have designed this product to operate reliably over many years. Please read this User‘s Manual carefully, so that you can begin making
optimum use of your Cameo Light product quickly. Learn more about Cameo Light on our website WWW.CAMEOLIGHT.COM.
PREVENTIVE MEASURES
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain that wall mounts are properly installed and
secured. Make certain that the equipment is installed securely and cannot fall down.
7. During installation, observ e the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is
always installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. This appliance is designed exclusively for indoor use, do not use this equipment in the immediate vicinity of water (does not apply
to special outdoor equipment - in this case, observe the special instructions noted below). Do not expose this equipment to flammable
materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with liquids, such as vases or
drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufacturer.
15. Do not open or modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.
17. During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if it has been damaged in
anot her way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired
by authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.
FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:
22. CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet with a protective
ground. Never deactivate the protective ground of a power cord.
23. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do not switch it on immediately.
Moisture and condensation could damage the equipment. Do not switch on the equipment until it has reached room temperature.
24. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match the values specified on the
equipment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the
mains power values match. If the included power cord or power adapter does not fit in your wall outlet, contact your electrician.
25. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at the mains outlet and/or power
adapter and the equipment connector.
26. When connecting the equipment, make certain that the power cord or power adapter is always freely accessible. Always disconnect the
equipment from the power supply if the equipment is not in use or if you want to clean the equipment. Always unplug the power cord and
power adapter from the power outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter
with wet hands.
27. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this can shorten the useful life of
the equipment.
28. IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service centre.
29. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter from the power outlet.
30. If your device is equipped with a Volex power connector, the mating Volex equipment connector must be unlocked before it can be re-
moved. However, this also means that the equipment can slide and fall down if the power cable is pulled, which can lead to personal injuries
and/or other damage. For this reason, always be careful when laying cables.
31. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse.
32. The device must only be installed in a voltage-free condition (disconnect the mains plug from the mains).
33. Dust and other debris inside the unit may cause damage. The unit should be regularly serviced or cleaned (no guarantee) depending on
ambient conditions (dust etc., nicotine, fog) by qualified personnel to prevent overheating and malfunction.
34. Please keep a distance of at least 0.5 m to any combustible materials.
35. Power cables to power multiple devices must have a cross-section of at least 1.5 mm². Within the EU, the cables must correspond to
H05VV-F, or similar. Suitable cables are offered by Adam Hall. With these cables, you can connect multiple devices via the power OUT con-
nection to the power IN connection of an additional device. Make sure that the total current consumption of all connected devices does not
exceed the specified value on all connected devices (label on the device). Make sure to keep power cable connections as short as possible.

Chatee con su manual de Cameo Steam Wizard 2000 usando IA

Obtenga respuestas instantáneas de IA de su manual de Cameo Steam Wizard 2000

Pregunte lo que quiera sobre Cameo Steam Wizard 2000. Las respuestas provienen de este manual, con las páginas en las que se basan.

Steam Wizard 2000 Programa de mantenimiento

Según sea necesario
Limpiar el exterior con un paño seco

Utilice un paño seco para limpiar el equipo. No utilice paños húmedos ni productos químicos.

Mostrar en el manual (página 3)
Según sea necesario
Servicio de limpieza interna

Dependiendo de las condiciones ambientales como polvo, nicotina o niebla, el personal cualificado debe realizar regularmente un servicio o limpieza interna de la unidad para evitar el sobrecalentamiento y mal funcionamiento.

Mostrar en el manual (página 3)
M: QW-35-FL

Haz una Pregunta

0/1000

¿Recomiendas Steam Wizard 2000?

Sí No

Preguntas frecuentes

A

Se utiliza para crear efectos de niebla combinados con iluminación LED de color para eventos, espectáculos escénicos, sesiones de DJ y otras configuraciones profesionales de entretenimiento.

¿Esta respuesta fue útil?

A

Sí. Ofrece control DMX de 4 canales, lo que permite integrarla en sistemas de iluminación y obtener un control más preciso de los efectos de niebla e iluminación.

¿Esta respuesta fue útil?

A

Sí. El control remoto por cable incluido te permite controlar la salida de niebla, el color de la iluminación, el brillo y las funciones de intervalo sin usar DMX.

¿Esta respuesta fue útil?

A

Solo debe utilizarse fluido de niebla Cameo a base de agua. Nunca deben añadirse líquidos inflamables al depósito.

¿Esta respuesta fue útil?

A

El tiempo de calentamiento es de unos cinco minutos, tras los cuales la unidad está lista para funcionar.

¿Esta respuesta fue útil?

A

Sí, pero solo cuando la instale personal cualificado y se asegure correctamente con el hardware de montaje adecuado y cables de seguridad.

¿Esta respuesta fue útil?

M: OA-GPT-54-NAN

Ventajas y Desventajas

Ventajas

  • Combina salida de niebla y efectos LED RGBA para un mayor impacto visual en una unidad compacta.
  • Admite control DMX y por remoto con cable, lo que facilita su uso tanto en configuraciones sencillas como avanzadas.
  • Ofrece calentamiento rápido, protección contra sobrecalentamiento y aviso de depósito vacío para un funcionamiento más seguro.
  • Puede montarse en distintos ángulos e incluye funciones prácticas como asa, pies de goma y ojales de seguridad.
VS

Desventajas

  • Está diseñada solo para uso profesional en interiores, por lo que no es ideal para montajes domésticos casuales ni para exteriores.
  • Solo requiere fluido de niebla a base de agua, lo que limita la flexibilidad y exige una planificación adecuada del suministro.
  • La boquilla se calienta mucho, por lo que es necesario manipularla con seguridad y dejar tiempo de enfriamiento después de usarla.
  • Con 1200 W, necesita una planificación eléctrica adecuada y una gestión cuidadosa de los cables en instalaciones en vivo.
M: OA-GPT-54-NAN

Producto Especificación

Tipo

Máquina de neblina

Potencia

1200W

Volumen de salida

500m³/min

Distancia de salida

7m

Consumo de fluido

50ml/min

Capacidad del tanque de fluido

2,50l

Control DMX

sí (4 canales)

Características

Control remoto, Efecto de luz, Temporizador, Apagado automático

Montaje

Asa de transporte

Dimensiones

300x140x420mm (AnxAlxPr)

Peso

9,00kg

M: GO-GEM-FL-25

Producto Descripción

Cameo Steam Wizard 2000: Niebla, color y energía escénica en una sola unidad

La Cameo Steam Wizard 2000 está diseñada para creadores que quieren más que una simple niebla. Esta compacta máquina de humo LED combina una potente salida de vapor con 12 LED RGBA 4 en 1 de 10 W, convirtiendo cada ráfaga en un efecto visual vibrante. Para técnicos de eventos, DJs móviles y pequeños locales, ofrece una forma práctica de añadir atmósfera, movimiento y color sin necesidad de equipo de iluminación adicional.

Uno de sus puntos fuertes es la flexibilidad. La unidad admite control DMX de 4 canales, por lo que puede integrarse fácilmente en un montaje de iluminación más grande, mientras que el control remoto por cable incluido facilita su uso sin controlador. El mando da acceso a la densidad de humo, el regulador, el modo de intervalo, el disparo manual, el brillo y la selección de color. Eso significa que puedes lanzar ráfagas rápidas, crear un efecto repetitivo o ajustar el aspecto sobre la marcha. El Manual del Steam Wizard 2000 también refleja la atención prestada al manejo sencillo y a una clara retroalimentación del estado mediante la pantalla LED y la luz del depósito.

La configuración es sencilla, pero la máquina está claramente diseñada para uso profesional. Solo necesita fluido de niebla a base de agua, se calienta en unos cinco minutos e incluye protección contra sobrecalentamiento además de una advertencia de depósito vacío. La carcasa es metálica, la base tiene pies de goma para una colocación estable y la unidad puede montarse en distintos ángulos sobre una truss cuando se instala correctamente. Un asa plegable, ojales de seguridad y el cable remoto de 10 m incluido también facilitan el transporte y el uso en eventos en vivo.

Lo que hace atractivo este modelo es la forma en que combina niebla y luz en un solo efecto. Los LED RGBA ofrecen 14 colores preestablecidos además del cambio automático de color, mientras que los efectos de estrobo y de desvanecimiento ayudan a crear un momento escénico más dramático. Es especialmente eficaz para introducciones, momentos de caída o breves acentos de actuación en los que una ráfaga de neblina debe sentirse enérgica y no solo funcional.

Aun así, no es un aparato doméstico casual. Está pensado para entornos de eventos en interiores, requiere ventilación y la boquilla se vuelve muy caliente durante el funcionamiento. La manipulación segura es importante, especialmente durante el transporte, el rellenado y el montaje en altura. Sin embargo, cuando se usa con cuidado, la Cameo Steam Wizard 2000 ofrece un efecto compacto, fiable y llamativo que puede elevar una configuración sencilla a algo mucho más memorable.

Notas

  • Utiliza solo fluido de niebla a base de agua aprobado.
  • Mantén una distancia mínima de 50 cm de la boquilla.
  • Permite que se enfríe completamente antes de limpiar o mover la unidad.
  • Para instalaciones en altura, utiliza personal cualificado y un rigging de seguridad adecuado.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly