Manual.ly Logo

Bosch DIY EasyDrill 1200 Manual

0,0 · 0 Valoraciones

Manual en PDF · 215 Páginas

Español

M: OA-GPT-54-NAN
página

/ 215

Loading...
373598f794fee1c172941749f256260fbe1b page 11
English | 17
Operation
Starting Operation
Inserting the battery
Note: The use of batteries unsuitable for your power tool can
lead to malfunctions or damage to the power tool.
Set the rotational direction switch (6) to the middle position
to avoid unintentionally switching it on. Insert the charged
battery (8) into the handle until you feel it engage and it is
flush with the handle.
Setting the rotational direction (see figureC)
The rotational direction switch (6) is used to change the ro-
tational direction of the power tool. However, this is not pos-
sible while the on/off switch (10) is being pressed.
Right rotation: To drill and to drive in screws, press the ro-
tational direction switch (6) through to the left stop.
Left Rotation: To loosen and unscrew screws and nuts,
press the rotational direction switch (6) through to the right
stop.
Setting the Operating Mode
Drilling
EasyDrill 1200:
Set the torque presetting ring(3) to the
"drilling" symbol.
EasyImpact 1200:
Set the operating mode presetting ring(4) to
the "drilling" symbol.
Screwdriving
EasyDrill 1200:
Set the torque presetting ring(3) to the re-
quired torque.
EasyImpact 1200:
Set the operating mode presetting ring(4) to
the "screwdriving" symbol.
Set the torque presetting ring(3) to the re-
quired torque.
Impact drilling
EasyImpact 1200:
Set the operating mode presetting ring(4) to
the "impact drilling" symbol.
Preselecting the Torque
The torque presetting ring (3) can be used to preselect the
required torque in 20 stages. When the correct setting is
used, the application tool will be stopped when the screw is
driven flush into the material or once the set torque has been
reached. In position the overload clutch is deactivated,
e.g. for drilling.
When unscrewing screws, you can select a higher setting or
set the tool to the symbol.
Adjusting the Speed
You can adjust the speed of the power tool when it is on by
pressing in the on/off switch (10) to varying extents.
A light pressure on the on/off switch (10) results in a low ro-
tational speed. Increased pressure on the switch causes an
increase in speed.
Adjusting the Speed/Impact Rate (EasyImpact1200)
You can adjust the speed/impact rate of the power tool when
it is on by pressing in the on/off switch (10) to varying ex-
tents.
Applying light pressure to the on/off switch (10) results in a
low rotational speed/impact rate. Applying increasing pres-
sure to the switch increases the speed/impact rate.
Mechanical gear selection
u Only operate the gear selector (5) when the power
tool is not in use.
You can preselect two speed ranges with the gear selector
(5).
Gear I:
Low speed range; for screwdriving or working with a large
drilling diameter.
Gear II:
High speed range; for working with a small drilling diameter.
If the gear selector switch (5) cannot be pushed all the way,
turn the tool holder (1) with the application tool slightly.
Switching on/off
To start the power tool, press and hold the on/off switch
(10).
The lamp (11) lights up when the on/off switch (10) is lightly
or fully pressed, meaning that the work area is illuminated in
poor lighting conditions.
To switch off the power tool, release the on/off switch (10).
Fully automatic spindle lock (Auto-Lock)
The drill spindle, and therefore the tool holder(1), are
locked when the on/off switch (10) is not pressed.
This enables screws to be screwed in even when the battery
(8) is empty and allows the power tool to be used as a
screwdriver.
Run-out brake
Upon releasing the on/off switch (10), the drill chuck is
slowed down, which prevents the application tool from con-
tinuing to rotate.
When driving in screws, you should therefore only release
the on/off switch (10) once the screw has been inserted
flush into the workpiece. This way, the head of screw will not
penetrate the workpiece.
Temperature-dependent overload protection
In normal conditions of use, the power tool cannot be over-
loaded. In the event of heaving loading or the temperature
rising/falling outside the permitted battery temperature
range, the speed will be reduced. The power tool will not run
at full speed again until the permitted battery temperature
has been reached.
Bosch Power Tools 1 609 92A 7WD | (20.06.2022)

Chatee con su manual de Bosch DIY EasyDrill 1200 usando IA

Obtenga respuestas instantáneas de IA de su manual de Bosch DIY EasyDrill 1200

Pregunte lo que quiera sobre Bosch DIY EasyDrill 1200. Las respuestas provienen de este manual, con las páginas en las que se basan.

EasyDrill 1200 Programa de mantenimiento

Después de un uso prolongado a baja velocidad
Enfriar la herramienta

Haga funcionar la herramienta a velocidad máxima sin carga durante aproximadamente 3 minutos para enfriarla después de trabajar a bajas velocidades durante un periodo prolongado.

Mostrar en el manual (página 17)
Antes de cada uso o según sea necesario
Verificar las partes móviles y el estado

Verifique que las partes móviles funcionen correctamente sin atascos y que no haya piezas rotas o dañadas antes del uso.

Mostrar en el manual (página 6)
Según sea necesario
Limpiar la herramienta y las ranuras de ventilación

Mantenga la herramienta eléctrica y las ranuras de ventilación limpias para garantizar un funcionamiento seguro y eficiente.

Mostrar en el manual (página 10)
M: QW-35-FL

Haz una Pregunta

0/1000

¿Recomiendas EasyDrill 1200?

Sí No

Preguntas frecuentes

A

Este taladro sin cables está diseñado para perforar madera, metal, cerámica y plástico. No está equipado para perforación de impacto en mampostería como ladrillo o piedra.

¿Esta respuesta fue útil?

A

Localiza el interruptor de dirección de rotación en la parte superior del mango. Deslízalo completamente a la izquierda para rotación horaria (atornillar) o completamente a la derecha para rotación antihoraria (destornillar).

¿Esta respuesta fue útil?

A

Sí, seleccionando la configuración de par apropiada en el anillo de preajuste. Para tornillos grandes en materiales duros, se recomienda hacer un agujero piloto previo para evitar que se parta el material.

¿Esta respuesta fue útil?

A

El producto generalmente se envía con una batería de litio-ión parcialmente cargada. Se recomienda cargarla completamente antes del primer uso para garantizar el máximo rendimiento.

¿Esta respuesta fue útil?

A

El selector de marchas te permite elegir entre dos rangos de velocidad. La Marcha I es para baja velocidad y alto par, ideal para atornillar. La Marcha II es para alta velocidad, adecuada para perforar agujeros pequeños.

¿Esta respuesta fue útil?

A

Las baterías Bosch generalmente vienen con un período de garantía específico. Por favor revisa el empaque o el sitio web oficial para la duración exacta aplicable a tu región.

¿Esta respuesta fue útil?

M: QW-35-FL

Ventajas y Desventajas

Ventajas

  • Diseño ligero y ergonómico para un manejo cómodo
  • Caja de cambios de dos velocidades ofrece versatilidad para perforar y atornillar
  • La luz LED integrada mejora la visibilidad en espacios oscuros
  • El portabrocas sin llave permite cambios rápidos y fáciles de puntas
  • La Protección Electrónica de Celdas evita la descarga profunda de la batería
VS

Desventajas

  • No es adecuado para perforación de mampostería pesada sin función de impacto
  • La capacidad de la batería puede ser insuficiente para trabajos continuos muy largos
  • El límite de par podría ser menor que los modelos de grado profesional
M: QW-35-FL

Producto Especificación

Tipo

Destornillador

M: QW-35-FL

Producto Descripción

Descubre el poder del Bosch DIY EasyDrill 1200

El taladro sin cables Bosch DIY EasyDrill 1200 es un testimonio de la ingeniería de precisión diseñada específicamente para entusiastas del bricolaje. Esta herramienta versátil combina fiabilidad y facilidad de uso, convirtiéndola en una adición esencial a cualquier kit de bricolaje. Ya sea que estés montando muebles, colgando estantes o realizando pequeñas reparaciones en casa, este talador ofrece un rendimiento constante sin las molestias de los cables.

En el corazón de su funcionamiento hay un sistema de batería de litio-ión de 12 voltios robusto. Esta fuente de energía garantiza que la herramienta permanezca ligera pero lo suficientemente potente para manejar una variedad de tareas. El diseño ergonómico cuenta con un mango aislado que mejora la seguridad y comodidad del usuario durante periodos prolongados de trabajo. Una característica destacada es la PowerLight integrada, que ilumina el área de trabajo en rincones oscuros, asegurando precisión incluso en entornos desafiantes.

El EasyDrill 1200 ofrece dos velocidades, permitiendo a los usuarios cambiar entre baja par para aplicaciones de atornillado y alta velocidad para perforar madera, metal, cerámica y plástico. El anillo de par ajustable proporciona 20 configuraciones diferentes, dándote un control preciso sobre qué tan apretado se introduce un tornillo, previniendo daños en los materiales o cabezas desgastadas. Además, el portabrocas sin llave permite cambios rápidos y sin herramientas de las puntas, agilizando significativamente tu flujo de trabajo.

La seguridad es primordial en el diseño de este dispositivo. Incluye un sistema de protección contra sobrecarga dependiente de la temperatura que reduce automáticamente la velocidad si el motor se calienta demasiado, protegiendo tanto la herramienta como el usuario. El bloqueo automático del husillo mantiene el portabrocas estacionario cuando se suelta el gatillo, haciendo los cambios de puntas más seguros y fáciles. Con estas características pensadas, la guía del manual Bosch DIY EasyDrill 1200 guía a los usuarios a través de una operación segura y eficiente cada vez.

Notas importantes

  • Siempre retira la batería antes de cambiar accesorios.
  • Usa protección ocular adecuada al perforar.
  • Asegúrate de que la pieza de trabajo esté firmemente sujetada antes de comenzar.
  • Usa solo cargadores recomendados para una vida óptima de la batería.

Pros

  • Diseño ligero y ergonómico para un manejo cómodo.
  • Caja de cambios de dos velocidades ofrece versatilidad para perforar y atornillar.
  • La luz LED integrada mejora la visibilidad en espacios oscuros.
  • El portabrocas sin llave permite cambios rápidos y fáciles de puntas.
  • La Protección Electrónica de Celdas evita la descarga profunda de la batería.

Contras

  • No es adecuado para perforación de mampostería pesada sin función de impacto.
  • La capacidad de la batería puede ser insuficiente para trabajos continuos muy largos.
  • El límite de par podría ser menor que los modelos de grado profesional.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly