Manual.ly Logo

BaByliss Pro FX8700E Manual

0,0 · 0 Valoraciones

Manual en PDF · 64 Páginas

Español

M: QW-35-FL
página

/ 64

Loading...
8b9075ea3a48715cb2936f439c87e86dca38 page 6
6
• To remove the comb guide,
ensure the appliance is switched
o. Push the tab on the rear of the
comb guide away from the head
and lift o.
Taper Control
The taper control lever enables
ne cut adjustment for precision
clipping.
• To increase the cutting length,
push the lever down.
• To reduce the cutting length,
push the lever up.
INSTRUCTIONS FOR USE
Charging the Appliance
• Before using the appliance
for the rst time, charge the
battery continuously for 3
hours. Maximum battery
capacity will only be reached
after 3 completed charging and
discharging cycles.
• Plug the charging adapter into
a suitable mains power socket.
The red LED indicator light will
ash when correctly connected
to the mains power and will
continuously ash until the
battery has fully charged. When
the battery is fully charged the
LED indicator light will stop
ashing but remain on.
NOTE: Always place the clipper in
the base with the ‘I/0’ switch in the
0/OFF position.
• When the clipper is running low
on charge, the LED indicator
light will ash, warning there
is approximately 3 minutes
of battery use remaining. A
3 hour charge will provide
approximately 120 minutes
use. A 30 minute quick charge
will provide approximately 30
minutes use.
• If the charging light starts to
ash rapidly (more than 4 ashes
per second) then the appliance
is faulty. If this happens then
please stop charging and remove
the adapter from the mains
and contact the customer care
service.
Preserving the Batteries
• In order to maintain the optimum
capacity of the rechargeable
batteries, the appliance should
be recharged for 3 hours
approximately every 3 months.
• Using the clipper on the
mains - ensure that the clipper
is switched o. Plug into a
suitable mains socket. Wait for
approximately a minute, and
then switch on.

Chatee con su manual de BaByliss Pro FX8700E usando IA

Obtenga respuestas instantáneas de IA de su manual de BaByliss Pro FX8700E

Pregunte lo que quiera sobre BaByliss Pro FX8700E. Las respuestas provienen de este manual, con las páginas en las que se basan.

FX8700E Programa de mantenimiento

Recuérdame cuándo corresponde realizar el mantenimiento
Cada 3 meses
Recargar la batería durante 3 horas

Para mantener la capacidad óptima de las baterías recargables, el aparato debe recargarse durante aproximadamente 3 horas cada 3 meses.

Mostrar en el manual (página 6)
Después de cada uso
Limpiar las cuchillas de la maquinilla y las guías del peine

Sople para eliminar los pelos o utilice el cepillo de limpieza. Enjuague las guías del peine bajo agua corriente y asegúrese de que estén completamente secas antes de guardarlas.

Mostrar en el manual (página 7)
Después de cada uso
Aceitar las cuchillas de la maquinilla

Aplique 2 gotas de aceite lubricante directamente sobre las cuchillas mientras están en funcionamiento para mantener un rendimiento de corte óptimo.

Mostrar en el manual (página 7)

Recordatorios de mantenimiento gratuitos

Según la fecha de compra. Siempre gratis, cancela la suscripción cuando quieras.

Al enviar, aceptas la política de privacidad. Cancela la suscripción con un clic en cualquier correo electrónico.
M: qwen/qwen3.8-flash

Haz una Pregunta

0/1000

¿Recomiendas FX8700E?

Sí No

Preguntas frecuentes

A

You must charge the device continuously for three hours before using it for the first time. Note that the battery will only reach its maximum capacity after three complete charge and discharge cycles.

¿Esta respuesta fue útil?

A

A rapidly flashing red light (more than four times per second) indicates that the appliance is faulty. You should unplug the adapter immediately and contact an authorized service center.

¿Esta respuesta fue útil?

A

Yes, the clipper can be used while plugged into the wall outlet. Simply connect the adapter to the clipper and then to the power source for continuous operation.

¿Esta respuesta fue útil?

A

Use the adjustable taper lever located near your thumb. Push the lever up for a shorter cut and push it down slowly for a longer cut. This allows you to vary the length without stopping the machine.

¿Esta respuesta fue útil?

A

For optimal performance, you should lubricate the blades before, during, and after every single use. Failure to do so may void the warranty and damage the blades.

¿Esta respuesta fue útil?

M: QW-35-FL

Ventajas y Desventajas

Ventajas

  • Ferrari-designed engine ensures high-speed cutting at 6300 rpm
  • Dual power options with 120-minute cordless runtime or direct plug-in
  • Adjustable taper lever allows instant length changes during cutting
VS

Desventajas

  • Requires strict adherence to blade cleaning and oiling schedules
  • Initial battery capacity takes three full cycles to reach maximum
  • Adapter may become warm during the charging process
M: QW-35-FL

Producto Especificación

Tipo

Cortadora de cabello

Ancho de corte

4,5 cm

Accesorios

8 peines

Tiempo de funcionamiento

2 horas

Tiempo de carga

3 horas

M: QW-35-FL

Producto Descripción

El manual de la cortadora de pelo BaByliss Pro FX8700: su guía para cortes profesionales

Logre resultados de calidad de salón en casa con la cortadora de pelo BaByliss Pro FX8700. Esta herramienta de grado profesional está diseñada para barberos y entusiastas que exigen precisión, potencia y fiabilidad. Ya sea que esté lidiando con cabello grueso o creando degradados intrincados, esta cortadora ofrece un rendimiento constante cada vez.

En el corazón de la FX8700 se encuentra un motor digital de alto par acoplado a tecnología EDM avanzada. Esta combinación garantiza un funcionamiento suave incluso bajo carga pesada, evitando el bloqueo y el sobrecalentamiento durante el uso prolongado. Las cuchillas están fabricadas con acero japonés premium, con una longitud de 45mm y un ángulo de corte V súper afilado. Estas características permiten deslizarse sin esfuerzo por el cabello mientras mantienen un borde increíblemente limpio y preciso.

El dispositivo cuenta con una batería de litio robusta que ofrece versatilidad tanto en modo con cable como inalámbrico. Una carga completa de tres horas proporciona hasta dos horas de tiempo de ejecución continuo, dándole suficiente tiempo para completar múltiples cortes sin interrupciones. Para toques rápidos, una carga rápida de treinta minutos produce aproximadamente treinta minutos de uso. La unidad también incluye una palanca de ajuste que permite cinco configuraciones distintas de altura de corte que van desde 0.8mm hasta 3.5mm, permitiendo ajustes finos para un blendaje sin fisuras.

La completitud es clave con este kit. Viene equipado con ocho peines guía que cubren longitudes desde 1.5mm hasta 19mm, asegurando que tenga el accesorio adecuado para cualquier estilo. El mantenimiento es sencillo; las cuchillas deben engrasarse después de cada uso para preservar el filo y la longevidad. El paquete incluye un cepillo de limpieza, aceite lubricante y una base de carga para mantener su equipo en óptimas condiciones. Asegúrese siempre de que el dispositivo esté apagado antes de colocar o retirar las protecciones para mantener la seguridad y prevenir daños accidentales.

Notas importantes

-Cargue la batería durante tres horas antes del primer uso para maximizar la capacidad. -Limpie las cuchillas después de cada sesión para evitar la acumulación. -Reemplace la batería de litio de manera responsable cuando alcance el final de su vida útil. -No opere en modo con cable por más de veinte minutos continuamente.

M: QW-35-FL

© Copyright 2026 Manual.ly